Insulated Pu Wall Panel
Take you to understand a new type of lightweight and energy-saving building material--insulated pu wall panel Metal carved board is a new type of lightweight and energy-saving building material that is popular in the world. It has excellent decorative effect, high strength, green environmental protection, heat preservation, fire prevention and waterproof, acid and alkali resistance, especially for dry construction, easy installation, labor and time saving, can greatly shorten the construction period, and does not generate construction waste, the application advantages are special obvious. 01 Metal Carved Panel Composition 1. The surface is made of galvanized steel plate (or aluminum plate) which has been specially processed; 2. The middle layer is rigid polyurethane foam (insulation layer); 3. The inner layer is made of aluminum foil or glass fiber cloth. 02 Metal Carved Panel Advantages 1. Light weight, high strength, good impact resistance. The quality is only 1/6 of that of stone, which reduces the load on the building. The light weight of the product makes the construction faster, which is 8 times faster than the installation speed of ordinary wall building materials. 2. The metal carved board has excellent waterproof performance. In dry, cold and humid weather, the performance is always stable and unaffected by condensation and wet weather. With a coating with self-cleaning function, the surface of the exterior wall can be self-cleaned after it rains. 3. The metal carved board has a stable chemical and physical structure, and will not decompose and mildew. No radiation, no pollution, green and environmental protection. The project cost is 1/3 of the traditional wall material. 4. Metal carved panels have excellent thermal insulation properties. Compared with ordinary decorative building materials, they have excellent cold resistance and thermal insulation properties. Greatly reduces heating and cooling energy consumption, thereby saving money. It can block 40dB of sound transmission and has a good sound insulation effect. 5. The structure is stable, the weather resistance is strong, and it can stand the test of harsh environments. It not only reduces the burden of the building itself, but also combines the use of earthquake-resistant buildings to greatly reduce the impact of earthquakes on buildings. The overall anti-seismic ability is strong, solid and safe.
Product Description
Metal insulated pu wall panel is a kind of decorative board that has the characteristics of beauty, light weight, fire prevention, heat preservation, sound insulation, corrosion resistance and convenient construction. It has been widely used in Japan. Metal carved exterior wall decorative panels are mainly used as environmental protection public toilets, activity rooms, sentry boxes, kiosks, door guards and other building interior and exterior wall materials in China, and gradually began to be used in high-end villas and building exterior walls, which is in line with national environmental protection requirements Ideal building material.
Metal carved exterior wall decorative panels are divided into single-sided 1.5cm thick and double-sided 2.5cm, 3.5cm, 5.0cm thick.
Metal carved galvanized composite insulation board is made of sub-aluminum alloy rigid plate, which is laminated with special resin under high pressure, filled with hard foam, and pasted with aluminum foil. Metal carved galvanized insulation board is a new type of wall building material developed in recent years. The surface is metal embossed with brick patterns, stone patterns, water ripples and other patterns. Seven times of special resin coating, there are more than 50 colors to choose from, and it is guaranteed not to fade for 10 years. The middle of the board is polyurethane foam to form a thermal insulation and heat insulation layer, and its interior is an independent closed air bubble structure. The aluminum foil pasted on the back can effectively reflect the heat source and play the role of heat insulation, heat preservation and moisture resistance. The combination of concave-convex plug-in and groove type makes the construction very simple. Metal carved galvanized composite insulation board is a kind of excellent performance building material with high compression resistance, moisture resistance, low thermal conductivity, beautiful appearance, durability, energy saving, convenient construction and environmental protection. Metal carved galvanized composite insulation board is widely used in building exterior wall insulation and interior decoration. It is a new type of green building material with high quality, low price and excellent quality among building materials.
Features of metal exterior waterproof wall panels
The metal insulated pu wall panel sentry box mainly adopts metal carved board as the insulation decoration of the outer wall of the house, and mostly adopts a pointed top design, with rich and varied colors and patterns, which can be changed at will according to different environments, and can fully meet the requirements of different customers. This kind of sentry box is not only beautiful and simple in shape, but also simple and convenient in construction and strong in practicability.
1. Beautiful decoration: The overall sentry box is beautiful and generous, with bright color, soft texture and smooth board surface, which has a good decorative effect. 2. Rich texture: a variety of colors can be matched at will. Brick pattern, stone pattern, marble pattern and other patterns are available. The classic pattern is uniform and suitable for horizontal installation
2. Light in size, strong in hardness, and convenient for construction: the outer wall is made of polyurethane and tin foil paper foaming synthesis. Therefore, it is easy to carry, easy to install, not easy to be damaged, and fast in construction.
3. Fireproof and flame retardant, thermal insulation: The metal carved board is sandwiched with a thermal insulation layer, which is one of the best thermal insulation building materials in the construction market.
4. Good waterproof and moisture-proof performance: There are gussets at the joints of the boards without gaps. Polyurethane foam has low water absorption and excellent waterproof and moisture-proof performance.
5. Long service life: the light steel structure is treated with anti-corrosion painting, and the normal service life is long;
6. Wide range of applications: community, property, on duty, sales, ticket sales, factories, shopping malls, schools, parking lots and other places.
The characteristics of the insulated pu wall panel
1. Insulation performance: due to the relationship between fillers, the cold resistance and heat resistance of metal carved panels can stand the test. The houses built by metal carved panels are cost-effective and save a lot of manpower, material and financial resources. It is already convenient for many of us to start from public toilets.
2. Easy to install: Metal carved panels are wall panels. Regardless of the climate in the north and south, it is easy to install. It is not subject to geographical restrictions at all.
It can be installed anywhere.
3. Waterproof and moisture-proof: Outdoor buildings are most afraid of the harsh environment, but metal carved panels are just waterproof and moisture-proof, which means that there is no need to worry about the cause of water seepage, and there is no need to over-protect it in rainy days.
4. Green and environmentally friendly: Nature itself is healthy. Under such circumstances, metal carved panels also need to be safe and harmless. With stable chemical structure and physical assistance, metal carved panels can be used in a healthy and safe manner, and can For multiple recycling, you only need to disassemble and take it to a new place to assemble and build.
More projects scene
What are the advantages of external wall thermal insulation materials? The advantages of external wall thermal insulation materials:
(1) External wall thermal insulation exterior waterproof wall panels have a protective effect on the main structure. The outdoor climate conditions cause large temperature changes inside the wall, which occur in the external thermal insulation layer to avoid the internal main structure. Generates large temperature changes and prolongs the life of the main body.
(2) It is beneficial to eliminate or weaken the thermal bridge effect of excessive local heat transfer. If internal insulation is used, the thermal bridge problem will be quite serious. The thermal bridge effect will cause heat loss, cause condensation and condensation, cause damage to the building, and affect the service life.
(3) The main structure is on the indoor side. Due to its strong heat storage capacity, it can avoid large fluctuations in room temperature.
⑷ When the existing buildings are reconstructed by adopting external thermal insulation, the disturbance to the residents can be greatly reduced.
⑸ Some residents have to renovate their new houses. In the decoration, the inner insulation layer is easily damaged, and the outer insulation can avoid this problem.
Specification
|
Product name |
exterior waterproof wall panels |
|
Size |
3800*380*16mm/20mm(Length can be customized,MOQ>100Sqm) |
|
Surface Textures and Appearance |
Coarse brick veins;Wide or narrow brick veins;Standard brick veins;Standard brick veins;Bark veins;Stone veins;Plain veins |
|
Materials |
Polyurethane |
|
Thickness |
0.23mm-0.5mm |
|
Unit weight |
3.5kg/m³ |
|
Waterproof rate |
415% |
|
Wind resistance |
8.0Kpa |
|
Thermal conductivity |
0.018W/m·k |
|
Thermal Resistance |
2.09㎡k/w |
|
PU Density |
40kg/m³ |
|
Compressive strength |
52.7kpa |
|
Characteristic |
Good temp-keeping and heat insulation |
|
Fine fireproof |
Test by national quality inspection center for fireproof building material, all its index reach grade B1 |
|
Technical support |
Incidental engineering drawings |
|
Used |
Various roofs and walls referring to the large size factory buildings, storages, exhibition halls, gymnasiums, freezing stores and purification workshops |
|
Installation |
Convenient and flexible without the large- size lifting devices so that the construction period is limited with the lower comprehensive costs |
|
Application |
Polyurethane /PU foam sandwich panel(exterior/interior wall panel) can be used on any structural buildings ,brick wall, Steel structure, CEM |
Installation of metal thermal insulation decorative board keel
Metal thermal insulation decorative exterior waterproof wall panels is a widely used exterior wall material in the construction industry. However, during construction and installation, the wall cannot directly fix the pendant. It is necessary to install the metal frame to fix the hanger. Therefore, the installation of the frame The construction quality of the plate is very important, and the method requirements when using the keel to install are as follows.
(1) Column installation
Before installing the column, first insert the core sleeve (for connecting the length of the column and the column, leaving more than 20mm penetration gap between the upper and lower columns.) into the column, then drill holes on the column, and install the connecting corner code with stainless steel bolts on the column. On the column, the two are separated by a protective gasket. One column installation: Two operators transport the column to the installation work surface, so that the existing center line on the column coincides with the column line determined during measurement, and the top of the column is level with the elevation control line determined during measurement. The connecting corner code is temporarily spot welded on the embedded steel plate, and then the position of the column is adjusted. After a column is accurate, put the upper column into the core sleeve of the next layer, and then spot welding after accurate positioning. This cycle completes the installation of a group of columns. The distance between the columns is controlled between 40cm-70cm. The installation sequence is as follows Bottom up, and lightning protection devices should be prepared. After the installation of the metal thermal insulation decorative panel on one side of the curtain wall is completed, the inspection is accurate and the installation is firm, and then welding is performed according to the requirements of the welding seam. The installation elevation error of the column should not be greater than 3mm, the front and rear axis error should not be greater than 2mm, and the left and right deviation should not be greater than 3mm. ; The installation elevation error of two adjacent columns should not be greater than 3mm, the maximum elevation deviation of the columns on the same floor should not be greater than 5mm, and the distance deviation of two adjacent columns should not be greater than 2mm.
(2) Beam installation
In the installation of the keel beam of the metal thermal insulation decorative exterior waterproof wall panels, the connectors and elastic rubber pads at both ends of the beam are installed at the predetermined positions of the columns, and the installation is required to be firm and the joints are tight. The installation of beams on the same floor should be carried out from bottom to top. When the height of the first floor is installed, it should be checked, adjusted, corrected and fixed to make it meet the quality requirements. The horizontal elevation deviation of two adjacent beams should not be greater than 1mm. Elevation deviation of the same layer: when the width of one piece is less than or equal to 35mm, it should not be greater than 5mm; when the width of one piece is greater than 35mm, it should not be greater than 7mm.
The installation quality of the keel is related to the construction quality and the firmness of the metal thermal insulation decorative panel, so when installing, it must be carried out in strict accordance with the relevant specifications, and the quality acceptance work must be done well.
1. SUPER FLAME RETARDATION
The coefficient of thermal conductivity is 0.023w/(m•k), which ensures better thermal insulation efficiency. In practice, this effectively keeps the building absorbing heat and brings enormous economic benefits.
2. DURABLE
PU sandwich panels are the most durable thermal insulating material in the construction industry. Under the normal maintenance,its service life is the same with buildings.
3. ECOLOGICAL
100% of the material is recyclable and the panels are friendly to the environment at the production and disposal stages.
4. EASY AND QUICK INSTALLATION
Compared with traditional thermal insulation methods, it use less material while the installation process is less time-consuming and labor-demanding leading to lower building costs.
5. THERMAL INSULATION
Depending on where you live, the sandwich panel insulation can come in handy for keeping you warm during winter and cool during summer.Having good thermal insulation also prevents cases of mold and humidity that result from condensation and heat movements.
6. FIRE RESISTANCE
It is why you would find a lot more people going for them as they know they can help protect their machines and other stuff in case of a fire breakout.
7. WATER AND AIR TIGHTNESS
Because of how the sandwich panels are designed and installed, they are also good at preventing water and air leakages. The joints are done well to a point that even when two panels are joined, there will be continued thermal insulation. You are likely to find that there will be no heat loss from the building.
Having a watertight structure means that the panels will work well in areas with snow and rain. They will also be good at preventing humidity and mold. Since the outer surfaces are made of color steel, they are also good at remaining corrosion-resistant.
8. SOUND ABSORPTION
Sound insulation is great, especially when you live in an area likely to have a lot of noise outdoors. When you have the panels installed, they will be good at absorbing the sound leaving you feeling comfortable.
Our Company
Jinan Dibaier Environmental Protection Materials Co., Ltd. has an advanced continuous production process of new exterior wall thermal insulation and decoration integrated board and color steel composite thermal insulation board, which can produce brick pattern, elastic coating pattern, water ripple, marble pattern and other patterns, which can meet the color of various buildings. And the integration of thermal insulation and decoration needs.
The new type of wall material in Dibaier has the characteristics of good thermal insulation, sound insulation and noise reduction, light weight, high strength, simple construction, corrosion resistance and strong decoration. Products are widely used in high-rise buildings, modern villas, light steel workshops, mobile homes, European and American-style box-type transformers, renovation of old buildings, mobile and housing in scenic spots, environmental protection public toilets and many other fields. The building materials are not only suitable for newly-built brick-concrete structures, frame structures, steel structures, light-body buildings and other types of buildings, but also for the decoration and energy-saving renovation of existing buildings, as well as indoor and outdoor decoration.
The advantages of siding panels exterior wall board you don't know!
Metal carved panels have become very common in the construction industry, and have been recognized by the public for their own characteristics and price advantages, and have become a new favorite for external wall thermal insulation and energy conservation. Compared with traditional thermal insulation materials, metal carved panels will have more advantages. Below, the editor of Dubaier will introduce the advantages of metal carved panels in detail.
1. The quality of metal carved panels is good
Metal carved panel integrates decorative and thermal insulation functions: in terms of decorative quality, since metal carved panel is a factory-made external wall thermal insulation system, it can easily achieve high quality that cannot be achieved by hand; in terms of thermal insulation and energy saving On the other hand, the structure and on-site installation mode of the metal engraved panel system ensure that the thermal insulation layer of the metal engraved panel will not be damaged due to construction, and it can also avoid the infiltration of rainwater due to the cracking of the paint and thermal insulation layer, which will lead to the thermal insulation layer. damage occurs. When the metal carved panels are in normal use, the state stipulates that the service life of the system is 25 years.
2, The overall cost of metal carved panels is lower
Although the initial investment cost of metal carved panels is slightly higher than that of traditional insulation materials, maintenance costs are much lower over the life of the building. The maintenance cost of metal carved panels is also lower. If the metal engraved board is damaged accidentally, just remove the old board and reinstall the new board.
3. The construction period of the metal carved panel system is shorter
The installation of metal carved panels is very simple, and it is relatively tolerant to the construction environment and climatic conditions. Moreover, it only needs to be installed once, and both the coating and the insulation can be completed, which completely eliminates the uncertainty of the construction period and quality caused by the cross-construction of the coating and the insulation, and improves the overall quality of the construction.
Product Features
Correct storage method of metal carved exterior waterproof wall panels on exterior walls
1. No tinder
Whether it is indoor or outdoor, any kind of fire should be prohibited wherever there are metal carved panels on the exterior walls. Inflammable and explosive dangerous goods should not be placed around it.
2. Control the amount of storage
Some people think that placing all the metal carved exterior waterproof wall panels on the exterior wall on the construction site will facilitate the acquisition of materials and save time. However, the construction site should not store too much thermal insulation material. Due to the limited space of the construction site, in addition to building materials, there are construction personnel and construction tools within a certain area. Once the materials on the site are piled up too much, it will cause insufficient use of the site area, narrow the scope of personnel activities, and affect the construction progress. Without any help, it will affect the construction progress and quality.
3. No stress
After the metal carved exterior waterproof wall panels of the exterior wall are stacked on the site, do not place heavy objects on the top, so as not to damage or break the insulation material. The height of material stacking should also be limited. If it is too high, the weight will increase, and the underlying material will be easily damaged, and it is easy to tilt and fall, posing a threat to personnel safety.
4. Keep ventilation
In the indoor construction environment, we must pay attention to ventilation. In this way, the indoor turbid air and toxic substances can be discharged to ensure indoor air convection, and it can also prevent dust, particles and other fine floating objects from accumulating indoors to a certain extent, causing explosions and threatening the safety of construction workers.
There are two main reasons for the fire of the metal carved exterior waterproof wall panels on the exterior walls. One is that the thermal insulation decorative panels used are of relatively low fire rating, and the other is that the construction personnel did not store and supervise them reasonably according to regulations. Controlling these two aspects can reduce the occurrence of fires, and it is very important to master the correct storage method of metal carved exterior waterproof wall panels for exterior walls.
Certificates
Package and shipping
FAQ
Q：How long it lasts outside without bleaching？
A：The outer metal layer can not rust for 45 years, and the paint color can not fade for 15 years.
Q：How to install doors and windows?
A：Cut to the right length and connect with door and window bag accessories.
Q：Will water seep in rainy days?
A：The excellent self-structure and the compact concave-convex plug-in and buckle-groove installation method between the plates avoids the structural damage caused by the cycle of rain, snow, freezing, thawing, dry and wet, and eliminates the worry of water seepage on the wall after installation. , effectively avoid the phenomenon of mold on the indoor wall.
Q：Is there sound insulation effect?
A：The core material in the middle is a thermal insulation and sound insulation layer composed of high-density polyurethane foam, and its interior is an independent closed cell structure, which has a good sound insulation effect.
Q：Can I get samples for inspection?
A：We will provide free samples to you before order confirmation.
Q：How long can it be stored?
A：As long as it is placed in a flat, dry and ventilated place, it can be stored for at least 50 years.
Q：Compared with other wall panels, what advantages does it have?
1. Thermal insulation and energy saving
2. Easy installation and cost saving
3. Lightweight, earth-saving, shock-resistant and crack-resistant Strong more options.
4. The sheet is flame-retardant, waterproof and moisture-proof
5. Sound and nois reduction Quiet and comfortable
6. Green environmental protection Durable
7. Strong decoration More options
8. Wide range of applications.
Tagiau poblogaidd: insulated pu wall panel, China, manufactures, suppliers, factory, price, for sale
